Please note that Surcharge values are not transmitted to Roomlynx and will not affect the quoted Rates within Rate Plan Search.
- Click on the Surcharge tab.
- Select the Analysis code.
- Choose the Type of charge:
- Flat - One set Charge.
- Percentage - Choose the analysis codes the charge should be worked out against.
- Set the Value.
- Select the Mode
- If surcharge is set as Flat, then the charge can be set to Per Room or Per Person
-
If surcharge is set as Percentage, then the charge can only be set to Per Room
- Click Save.
Comments
0 comments
Article is closed for comments.