This area should be configured by eRevMax, to check that currencies are correct click the + on Expand All
Reservation Conversion Factor
Can be used to adjust reservations before entering Roomlynx i.e. take off/add on commission
This section does not need to be completed for an installation
If you want the same value to be sent on the PMS as received from the website, please set then value as 100%
If you want to add 20% to the value, then add 120%
Rate Weight (must be completed)
Channel Level: Will discount all rates sent to the channel shown (the discount can be in % or momentary, select using the button next to the entry cell)
Room Level: Will discount all the rate for the room and rate combination shown
Occupancy Level not used
If you need to stop only the rates from flowing to the extranet, you need to put -100% as rate weight.
Min: Putting a rate in here will prevent the rate being sent to the channel outside of the parameters
Exclude: This should be ticked for 'non managed' rates at channel level so ARI is not sent but reservations can be processed successfully
To progress with the install without adding to this section (if not required) click SAVE, this will enter zeros into the necessary fields.
Next Step: RTConnect Allocation Split